Dynomotion

Group: DynoMotion Message: 6295 From: b_adrian@ymail.com Date: 12/18/2012
Subject: KMotion screen
KMotion has the Main screen with three axes while in the help page it is presented with 6 axes. How can I change the existing 3 axes screen to 6 axes?

Thanks,
Adrian
Group: DynoMotion Message: 6296 From: Michael Rosenfield Date: 12/18/2012
Subject: Re: KMotion screen
Very easy -click on the Tool Setup button on the main screen, then click on the Tool/Setup Files tab, and then change the selection under Main Dialog Face.
 
Michael Rosenfield
 
Group: DynoMotion Message: 6297 From: tmday7 Date: 12/18/2012
Subject: Re: KMotion screen
Click Tool Setup (above Gcode to the right) then Tool/Setup Files tab. Main Dialog Face drop down menu.
HTH
Troy

--- In DynoMotion@yahoogroups.com, "b_adrian@..." wrote:

KMotion has the Main screen with three axes while in the help page it is presented with 6 axes. How can I change the existing 3 axes screen to 6 axes?

Thanks,
Adrian
Group: DynoMotion Message: 6298 From: Adrian Balan Date: 12/19/2012
Subject: Re: KMotion screen
Attachments :

    It was very easy, indeed. Checking the Help page related to this issue I found that the Main Dialog Face can be altered by using Windows Resource Editor or Resource Hacker Editor. The question is where are located the KMotionCNC resource files? Is there  a way to make the screens resizable?

     

    Thanks,

    Adrian

     

    From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of Michael Rosenfield
    Sent: Tuesday, December 18, 2012 10:43 AM
    To: dynomotion@yahoogroups.com
    Subject: RE: [DynoMotion] KMotion screen

     

     

    Very easy -click on the Tool Setup button on the main screen, then click on the Tool/Setup Files tab, and then change the selection under Main Dialog Face.
     
    Michael Rosenfield
     

    To: DynoMotion@yahoogroups.com
    From: adrian@...
    Date: Tue, 18 Dec 2012 15:19:45 +0000
    Subject: [DynoMotion] KMotion screen

     

    KMotion has the Main screen with three axes while in the help page it is presented with 6 axes. How can I change the existing 3 axes screen to 6 axes?

    Thanks,
    Adrian
    Group: DynoMotion Message: 6299 From: Tom Kerekes Date: 12/19/2012
    Subject: Re: KMotion screen
    Hi Adrian,
     
    Windows binary Resources are embedded right in the executable (KMotionCNC.exe).  It is somewhat complicated to do if you are not familiar with Windows and you wil need to re-do the changes for each new Version if you upgrade.  You can make the screens any size you wish, but they won't be re-sizable without changing the KMotionCNC source code and re-compiling.  Which screen type do you like.  We may be able to make a resizable version for you.
     
    Regards
    TK

    Group: DynoMotion Message: 6300 From: Adrian Balan Date: 12/20/2012
    Subject: Re: KMotion screen
    Attachments :

      I was asking for the resizable version because I have ordered a touch screen. When I will get it installed and tested I will ask for help if I will need it.

      Always is uplifting when you know that there is someone ready to jump and help you.

       

      Thank you,

      Adrian

       

      From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of Tom Kerekes
      Sent: Wednesday, December 19, 2012 6:31 PM
      To: DynoMotion@yahoogroups.com
      Subject: Re: [DynoMotion] KMotion screen

       

      Hi Adrian,

       

      Windows binary Resources are embedded right in the executable (KMotionCNC.exe).  It is somewhat complicated to do if you are not familiar with Windows and you wil need to re-do the changes for each new Version if you upgrade.  You can make the screens any size you wish, but they won't be re-sizable without changing the KMotionCNC source code and re-compiling.  Which screen type do you like.  We may be able to make a resizable version for you.

       

      Regards

      TK

       

      From: Adrian Balan <adrian@...>
      To: DynoMotion@yahoogroups.com
      Sent: Wednesday, December 19, 2012 12:32 PM
      Subject: RE: [DynoMotion] KMotion screen

       

      It was very easy, indeed. Checking the Help page related to this issue I found that the Main Dialog Face can be altered by using Windows Resource Editor or Resource Hacker Editor. The question is where are located the KMotionCNC resource files? Is there  a way to make the screens resizable?

       

      Thanks,

      Adrian

       

      From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of Michael Rosenfield
      Sent: Tuesday, December 18, 2012 10:43 AM
      To: dynomotion@yahoogroups.com
      Subject: RE: [DynoMotion] KMotion screen

       

       

      Very easy -click on the Tool Setup button on the main screen, then click on the Tool/Setup Files tab, and then change the selection under Main Dialog Face.
       
      Michael Rosenfield
       

      To: DynoMotion@yahoogroups.com
      From: adrian@...
      Date: Tue, 18 Dec 2012 15:19:45 +0000
      Subject: [DynoMotion] KMotion screen

       

      KMotion has the Main screen with three axes while in the help page it is presented with 6 axes. How can I change the existing 3 axes screen to 6 axes?

      Thanks,
      Adrian
      Group: DynoMotion Message: 6303 From: oxforduniv Date: 12/21/2012
      Subject: Re: KMotion screen
      Out of interest, what is the resolution of your screen?
      Al.

      --- In DynoMotion@yahoogroups.com, "Adrian Balan" <adrian@...> wrote:
      >
      > I was asking for the resizable version because I have ordered a touch screen. When I will get it installed and tested I will ask for help if I will need it.
      >
      > Always is uplifting when you know that there is someone ready to jump and help you.
      >
      >
      >
      > Thank you,
      >
      > Adrian
      >
      >
      >
      > From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of Tom Kerekes
      > Sent: Wednesday, December 19, 2012 6:31 PM
      > To: DynoMotion@yahoogroups.com
      > Subject: Re: [DynoMotion] KMotion screen
      >
      >
      >
      > Hi Adrian,
      >
      >
      >
      > Windows binary Resources are embedded right in the executable (KMotionCNC.exe). It is somewhat complicated to do if you are not familiar with Windows and you wil need to re-do the changes for each new Version if you upgrade. You can make the screens any size you wish, but they won't be re-sizable without changing the KMotionCNC source code and re-compiling. Which screen type do you like. We may be able to make a resizable version for you.
      >
      >
      >
      > Regards
      >
      > TK
      >
      >
      >
      > From: Adrian Balan <adrian@...>
      > To: DynoMotion@yahoogroups.com
      > Sent: Wednesday, December 19, 2012 12:32 PM
      > Subject: RE: [DynoMotion] KMotion screen
      >
      >
      >
      > It was very easy, indeed. Checking the Help page related to this issue I found that the Main Dialog Face can be altered by using Windows Resource Editor or Resource Hacker Editor. The question is where are located the KMotionCNC resource files? Is there a way to make the screens resizable?
      >
      >
      >
      > Thanks,
      >
      > Adrian
      >
      >
      >
      > From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of Michael Rosenfield
      > Sent: Tuesday, December 18, 2012 10:43 AM
      > To: dynomotion@yahoogroups.com
      > Subject: RE: [DynoMotion] KMotion screen
      >
      >
      >
      >
      >
      > Very easy -click on the Tool Setup button on the main screen, then click on the Tool/Setup Files tab, and then change the selection under Main Dialog Face.
      >
      > Michael Rosenfield
      >
      >
      > To: DynoMotion@yahoogroups.com
      > From: adrian@...
      > Date: Tue, 18 Dec 2012 15:19:45 +0000
      > Subject: [DynoMotion] KMotion screen
      >
      >
      >
      > KMotion has the Main screen with three axes while in the help page it is presented with 6 axes. How can I change the existing 3 axes screen to 6 axes?
      >
      > Thanks,
      > Adrian
      >
      Group: DynoMotion Message: 6304 From: Adrian Balan Date: 12/21/2012
      Subject: Re: KMotion screen
      Attachments :

        It is a TFT 7”/800x480 USB powered.

         

        From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of oxforduniv
        Sent: Friday, December 21, 2012 10:29 AM
        To: DynoMotion@yahoogroups.com
        Subject: [DynoMotion] Re: KMotion screen

         

         

        Out of interest, what is the resolution of your screen?
        Al.

        --- In DynoMotion@yahoogroups.com, "Adrian Balan" <adrian@...> wrote:
        >
        > I was asking for the resizable version because I have ordered a touch screen. When I will get it installed and tested I will ask for help if I will need it.
        >
        > Always is uplifting when you know that there is someone ready to jump and help you.
        >
        >
        >
        > Thank you,
        >
        > Adrian
        >
        >
        >
        > From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of Tom Kerekes
        > Sent: Wednesday, December 19, 2012 6:31 PM
        > To: DynoMotion@yahoogroups.com
        > Subject: Re: [DynoMotion] KMotion screen
        >
        >
        >
        > Hi Adrian,
        >
        >
        >
        > Windows binary Resources are embedded right in the executable (KMotionCNC.exe). It is somewhat complicated to do if you are not familiar with Windows and you wil need to re-do the changes for each new Version if you upgrade. You can make the screens any size you wish, but they won't be re-sizable without changing the KMotionCNC source code and re-compiling. Which screen type do you like. We may be able to make a resizable version for you.
        >
        >
        >
        > Regards
        >
        > TK
        >
        >
        >
        > From: Adrian Balan <adrian@...>
        > To: DynoMotion@yahoogroups.com
        > Sent: Wednesday, December 19, 2012 12:32 PM
        > Subject: RE: [DynoMotion] KMotion screen
        >
        >
        >
        > It was very easy, indeed. Checking the Help page related to this issue I found that the Main Dialog Face can be altered by using Windows Resource Editor or Resource Hacker Editor. The question is where are located the KMotionCNC resource files? Is there a way to make the screens resizable?
        >
        >
        >
        > Thanks,
        >
        > Adrian
        >
        >
        >
        > From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of Michael Rosenfield
        > Sent: Tuesday, December 18, 2012 10:43 AM
        > To: dynomotion@yahoogroups.com
        > Subject: RE: [DynoMotion] KMotion screen
        >
        >
        >
        >
        >
        > Very easy -click on the Tool Setup button on the main screen, then click on the Tool/Setup Files tab, and then change the selection under Main Dialog Face.
        >
        > Michael Rosenfield
        >
        >
        > To: DynoMotion@yahoogroups.com
        > From: adrian@...
        > Date: Tue, 18 Dec 2012 15:19:45 +0000
        > Subject: [DynoMotion] KMotion screen
        >
        >
        >
        > KMotion has the Main screen with three axes while in the help page it is presented with 6 axes. How can I change the existing 3 axes screen to 6 axes?
        >
        > Thanks,
        > Adrian
        >